Total
1498 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-40236 | 1 Pexip | 1 Virtual Meeting Rooms | 2025-04-23 | 5.3 Medium |
| In Pexip VMR self-service portal before 3, the same SSH host key is used across different customers' installations, which allows authentication bypass. | ||||
| CVE-2022-34840 | 1 Buffalo | 18 Hw-450hp-zwe, Hw-450hp-zwe Firmware, Wzr-300hp and 15 more | 2025-04-23 | 6.5 Medium |
| Use of hard-coded credentials vulnerability in multiple Buffalo network devices allows a network-adjacent attacker to alter?configuration settings of the device. The affected products/versions are as follows: WZR-300HP firmware Ver. 2.00 and earlier, WZR-450HP firmware Ver. 2.00 and earlier, WZR-600DHP firmware Ver. 2.00 and earlier, WZR-900DHP firmware Ver. 1.15 and earlier, HW-450HP-ZWE firmware Ver. 2.00 and earlier, WZR-450HP-CWT firmware Ver. 2.00 and earlier, WZR-450HP-UB firmware Ver. 2.00 and earlier, WZR-600DHP2 firmware Ver. 1.15 and earlier, and WZR-D1100H firmware Ver. 2.00 and earlier. | ||||
| CVE-2022-39273 | 1 Flyte | 1 Flyteadmin | 2025-04-23 | 4.8 Medium |
| FlyteAdmin is the control plane for the data processing platform Flyte. Users who enable the default Flyte’s authorization server without changing the default clientid hashes will be exposed to the public internet. In an effort to make enabling authentication easier for Flyte administrators, the default configuration for Flyte Admin allows access for Flyte Propeller even after turning on authentication via a hardcoded hashed password. This password is also set on the default Flyte Propeller configmap in the various Flyte Helm charts. Users who enable auth but do not override this setting in Flyte Admin’s configuration may unbeknownst to them be allowing public traffic in by way of this default password with attackers effectively impersonating propeller. This only applies to users who have not specified the ExternalAuthorizationServer setting. Usage of an external auth server automatically turns off this default configuration and are not susceptible to this vulnerability. This issue has been addressed in version 1.1.44. Users should manually set the staticClients in the selfAuthServer section of their configuration if they intend to rely on Admin’s internal auth server. Again, users who use an external auth server are automatically protected from this vulnerability. | ||||
| CVE-2022-38420 | 1 Adobe | 1 Coldfusion | 2025-04-23 | 7.5 High |
| Adobe ColdFusion versions Update 14 (and earlier) and Update 4 (and earlier) are affected by a Use of Hard-coded Credentials vulnerability that could result in application denial-of-service by gaining access to start/stop arbitrary services. Exploitation of this issue does not require user interaction. | ||||
| CVE-2022-40259 | 1 Ami | 1 Megarac Sp-x | 2025-04-23 | 8.3 High |
| MegaRAC Default Credentials Vulnerability | ||||
| CVE-2022-32967 | 1 Realtek | 4 Rtl8111ep-cg, Rtl8111ep-cg Firmware, Rtl8111fp-cg and 1 more | 2025-04-23 | 2.1 Low |
| RTL8111EP-CG/RTL8111FP-CG DASH function has hard-coded password. An unauthenticated physical attacker can use the hard-coded default password during system reboot triggered by other user, to acquire partial system information such as serial number and server information. | ||||
| CVE-2022-40242 | 1 Ami | 1 Megarac Sp-x | 2025-04-23 | 7.5 High |
| MegaRAC Default Credentials Vulnerability | ||||
| CVE-2022-24860 | 1 Databasir Project | 1 Databasir | 2025-04-22 | 7.4 High |
| Databasir is a team-oriented relational database model document management platform. Databasir 1.01 has Use of Hard-coded Cryptographic Key vulnerability. An attacker can use hard coding to generate login credentials of any user and log in to the service background located at different IP addresses. | ||||
| CVE-2015-4667 | 1 Xceedium | 1 Xsuite | 2025-04-20 | N/A |
| Multiple hardcoded credentials in Xsuite 2.x. | ||||
| CVE-2017-12709 | 1 Westermo | 8 Mrd-305-din, Mrd-305-din Firmware, Mrd-315-din and 5 more | 2025-04-20 | N/A |
| A Use of Hard-Coded Credentials issue was discovered in MRD-305-DIN versions older than 1.7.5.0, and MRD-315, MRD-355, MRD-455 versions older than 1.7.5.0. The device utilizes hard-coded credentials, which could allow for unauthorized local low-privileged access to the device. | ||||
| CVE-2017-12350 | 1 Cisco | 1 Umbrella Insights Virtual Appliance | 2025-04-20 | N/A |
| A vulnerability in Cisco Umbrella Insights Virtual Appliances 2.1.0 and earlier could allow an authenticated, local attacker to log in to an affected virtual appliance with root privileges. The vulnerability is due to the presence of default, static user credentials for an affected virtual appliance. An attacker could exploit this vulnerability by using the hypervisor console to connect locally to an affected system and then using the static credentials to log in to an affected virtual appliance. A successful exploit could allow the attacker to log in to the affected appliance with root privileges. Cisco Bug IDs: CSCvg31220. | ||||
| CVE-2017-12317 | 1 Cisco | 1 Advanced Malware Protection | 2025-04-20 | N/A |
| The Cisco AMP For Endpoints application allows an authenticated, local attacker to access a static key value stored in the local application software. The vulnerability is due to the use of a static key value stored in the application used to encrypt the connector protection password. An attacker could exploit this vulnerability by gaining local, administrative access to a Windows host and stopping the Cisco AMP for Endpoints service. Cisco Bug IDs: CSCvg42904. | ||||
| CVE-2017-12239 | 1 Cisco | 1 Ios Xe | 2025-04-20 | 6.8 Medium |
| A vulnerability in motherboard console ports of line cards for Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to access an affected device's operating system. The vulnerability exists because an engineering console port is available on the motherboard of the affected line cards. An attacker could exploit this vulnerability by physically connecting to the console port on the line card. A successful exploit could allow the attacker to gain full access to the affected device's operating system. This vulnerability affects only Cisco ASR 1000 Series Routers that have removable line cards and Cisco cBR-8 Converged Broadband Routers, if they are running certain Cisco IOS XE 3.16 through 16.5 releases. Cisco Bug IDs: CSCvc65866, CSCve77132. | ||||
| CVE-2015-2887 | 1 Ibaby | 2 M3s Baby Monitor, M3s Baby Monitor Firmware | 2025-04-20 | N/A |
| iBaby M3S has a password of admin for the backdoor admin account. | ||||
| CVE-2017-11436 | 1 Dlink | 1 Dir-615 | 2025-04-20 | 9.8 Critical |
| D-Link DIR-615 before v20.12PTb04 has a second admin account with a 0x1 BACKDOOR value, which might allow remote attackers to obtain access via a TELNET connection. | ||||
| CVE-2017-11743 | 1 Medhost | 1 Connex | 2025-04-20 | N/A |
| MEDHOST Connex contains a hard-coded Mirth Connect admin credential that is used for customer Mirth Connect management access. An attacker with knowledge of the hard-coded credential and the ability to communicate directly with the Mirth Connect management console may be able to intercept sensitive patient information. The admin account password is hard-coded as $K8t1ng throughout the application, and is the same across all installations. Customers do not have the option to change the Mirth Connect admin account password. The Mirth Connect admin account is created during the Connex install. The plaintext account password is hard-coded multiple times in the Connex install and update scripts. | ||||
| CVE-2015-2885 | 1 Lens Laboratories | 2 Peek-a-view, Peek-a-view Firmware | 2025-04-20 | N/A |
| Lens Peek-a-View has a password of 2601hx for the backdoor admin account, a password of user for the backdoor user account, and a password of guest for the backdoor guest account. | ||||
| CVE-2017-11694 | 1 Medhost | 1 Medhost Document Management System | 2025-04-20 | N/A |
| MEDHOST Document Management System contains hard-coded credentials that are used for Apache Solr access. An attacker with knowledge of the hard-coded credentials and the ability to communicate directly with Apache Solr may be able to obtain or modify sensitive patient and financial information. The Apache Solr account name is dms. The password is hard-coded throughout the application, and is the same across all installations. Customers do not have the option to change passwords. The dms account for Apache Solr has access to all indexed patient documents. | ||||
| CVE-2017-11693 | 1 Medhost | 1 Medhost Document Management System | 2025-04-20 | N/A |
| MEDHOST Document Management System contains hard-coded credentials that are used for customer database access. An attacker with knowledge of the hard-coded credentials and the ability to communicate directly with the database may be able to obtain or modify sensitive patient and financial information. PostgreSQL is used as the Document Management System database. The account name is dms. The password is hard-coded throughout the application, and is the same across all installations. Customers do not have the option to change passwords. The dms account for PostgreSQL has access to the database schema for Document Management System. | ||||
| CVE-2015-2882 | 1 Philips | 1 In.sight B120\\37 | 2025-04-20 | N/A |
| Philips In.Sight B120/37 has a password of b120root for the backdoor root account, a password of /ADMIN/ for the backdoor admin account, a password of merlin for the backdoor mg3500 account, a password of M100-4674448 for the backdoor user account, and a password of M100-4674448 for the backdoor admin account. | ||||