Filtered by vendor Linux
Subscriptions
Total
13362 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53330 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: caif: fix memory leak in cfctrl_linkup_request() When linktype is unknown or kzalloc failed in cfctrl_linkup_request(), pkt is not released. Add release process to error path. | ||||
| CVE-2023-53322 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Wait for io return on terminate rport System crash due to use after free. Current code allows terminate_rport_io to exit before making sure all IOs has returned. For FCP-2 device, IO's can hang on in HW because driver has not tear down the session in FW at first sign of cable pull. When dev_loss_tmo timer pops, terminate_rport_io is called and upper layer is about to free various resources. Terminate_rport_io trigger qla to do the final cleanup, but the cleanup might not be fast enough where it leave qla still holding on to the same resource. Wait for IO's to return to upper layer before resources are freed. | ||||
| CVE-2025-39822 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: fix signedness in this_len calculation When importing and using buffers, buf->len is considered unsigned. However, buf->len is converted to signed int when committing. This can lead to unexpected behavior if the buffer is large enough to be interpreted as a negative value. Make min_t calculation unsigned. | ||||
| CVE-2025-39823 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: use array_index_nospec with indices that come from guest min and dest_id are guest-controlled indices. Using array_index_nospec() after the bounds checks clamps these values to mitigate speculative execution side-channels. | ||||
| CVE-2022-50346 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: init quota for 'old.inode' in 'ext4_rename' Syzbot found the following issue: ext4_parse_param: s_want_extra_isize=128 ext4_inode_info_init: s_want_extra_isize=32 ext4_rename: old.inode=ffff88823869a2c8 old.dir=ffff888238699828 new.inode=ffff88823869d7e8 new.dir=ffff888238699828 __ext4_mark_inode_dirty: inode=ffff888238699828 ea_isize=32 want_ea_size=128 __ext4_mark_inode_dirty: inode=ffff88823869a2c8 ea_isize=32 want_ea_size=128 ext4_xattr_block_set: inode=ffff88823869a2c8 ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2234 at fs/ext4/xattr.c:2070 ext4_xattr_block_set.cold+0x22/0x980 Modules linked in: RIP: 0010:ext4_xattr_block_set.cold+0x22/0x980 RSP: 0018:ffff888227d3f3b0 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88823007a000 RCX: 0000000000000000 RDX: 0000000000000a03 RSI: 0000000000000040 RDI: ffff888230078178 RBP: 0000000000000000 R08: 000000000000002c R09: ffffed1075c7df8e R10: ffff8883ae3efc6b R11: ffffed1075c7df8d R12: 0000000000000000 R13: ffff88823869a2c8 R14: ffff8881012e0460 R15: dffffc0000000000 FS: 00007f350ac1f740(0000) GS:ffff8883ae200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f350a6ed6a0 CR3: 0000000237456000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? ext4_xattr_set_entry+0x3b7/0x2320 ? ext4_xattr_block_set+0x0/0x2020 ? ext4_xattr_set_entry+0x0/0x2320 ? ext4_xattr_check_entries+0x77/0x310 ? ext4_xattr_ibody_set+0x23b/0x340 ext4_xattr_move_to_block+0x594/0x720 ext4_expand_extra_isize_ea+0x59a/0x10f0 __ext4_expand_extra_isize+0x278/0x3f0 __ext4_mark_inode_dirty.cold+0x347/0x410 ext4_rename+0xed3/0x174f vfs_rename+0x13a7/0x2510 do_renameat2+0x55d/0x920 __x64_sys_rename+0x7d/0xb0 do_syscall_64+0x3b/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc As 'ext4_rename' will modify 'old.inode' ctime and mark inode dirty, which may trigger expand 'extra_isize' and allocate block. If inode didn't init quota will lead to warning. To solve above issue, init 'old.inode' firstly in 'ext4_rename'. | ||||
| CVE-2023-53312 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: fix net_dev_start_xmit trace event vs skb_transport_offset() After blamed commit, we must be more careful about using skb_transport_offset(), as reminded us by syzbot: WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 skb_transport_offset include/linux/skbuff.h:2977 [inline] WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14 Modules linked in: CPU: 0 PID: 10 Comm: kworker/u4:1 Not tainted 6.1.30-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet RIP: 0010:skb_transport_header include/linux/skbuff.h:2868 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:2977 [inline] RIP: 0010:perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14 Code: 8b 04 25 28 00 00 00 48 3b 84 24 c0 00 00 00 0f 85 4e 04 00 00 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc e8 56 22 01 fd <0f> 0b e9 f6 fc ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 86 f9 ff RSP: 0018:ffffc900002bf700 EFLAGS: 00010293 RAX: ffffffff8485d8ca RBX: 000000000000ffff RCX: ffff888100914280 RDX: 0000000000000000 RSI: 000000000000ffff RDI: 000000000000ffff RBP: ffffc900002bf818 R08: ffffffff8485d5b6 R09: fffffbfff0f8fb5e R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff110217d8f67 R13: ffff88810bec7b3a R14: dffffc0000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f96cf6d52f0 CR3: 000000012224c000 CR4: 0000000000350ef0 Call Trace: <TASK> [<ffffffff84715e35>] trace_net_dev_start_xmit include/trace/events/net.h:14 [inline] [<ffffffff84715e35>] xmit_one net/core/dev.c:3643 [inline] [<ffffffff84715e35>] dev_hard_start_xmit+0x705/0x980 net/core/dev.c:3660 [<ffffffff8471a232>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff85416493>] dev_queue_xmit include/linux/netdevice.h:3030 [inline] [<ffffffff85416493>] batadv_send_skb_packet+0x3f3/0x680 net/batman-adv/send.c:108 [<ffffffff85416744>] batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127 [<ffffffff853bc52a>] batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] [<ffffffff853bc52a>] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] [<ffffffff853bc52a>] batadv_iv_send_outstanding_bat_ogm_packet+0x69a/0x840 net/batman-adv/bat_iv_ogm.c:1701 [<ffffffff8151023c>] process_one_work+0x8ac/0x1170 kernel/workqueue.c:2289 [<ffffffff81511938>] worker_thread+0xaa8/0x12d0 kernel/workqueue.c:2436 | ||||
| CVE-2023-53332 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask() If ipi_send_{mask|single}() is called with an invalid interrupt number, all the local variables there will be NULL. ipi_send_verify() which is invoked from these functions does verify its 'data' parameter, resulting in a kernel oops in irq_data_get_affinity_mask() as the passed NULL pointer gets dereferenced. Add a missing NULL pointer check in ipi_send_verify()... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. | ||||
| CVE-2023-53333 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic one Eric Dumazet says: nf_conntrack_dccp_packet() has an unique: dh = skb_header_pointer(skb, dataoff, sizeof(_dh), &_dh); And nothing more is 'pulled' from the packet, depending on the content. dh->dccph_doff, and/or dh->dccph_x ...) So dccp_ack_seq() is happily reading stuff past the _dh buffer. BUG: KASAN: stack-out-of-bounds in nf_conntrack_dccp_packet+0x1134/0x11c0 Read of size 4 at addr ffff000128f66e0c by task syz-executor.2/29371 [..] Fix this by increasing the stack buffer to also include room for the extra sequence numbers and all the known dccp packet type headers, then pull again after the initial validation of the basic header. While at it, mark packets invalid that lack 48bit sequence bit but where RFC says the type MUST use them. Compile tested only. v2: first skb_header_pointer() now needs to adjust the size to only pull the generic header. (Eric) Heads-up: I intend to remove dccp conntrack support later this year. | ||||
| CVE-2025-39826 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: rose: convert 'use' field to refcount_t The 'use' field in struct rose_neigh is used as a reference counter but lacks atomicity. This can lead to race conditions where a rose_neigh structure is freed while still being referenced by other code paths. For example, when rose_neigh->use becomes zero during an ioctl operation via rose_rt_ioctl(), the structure may be removed while its timer is still active, potentially causing use-after-free issues. This patch changes the type of 'use' from unsigned short to refcount_t and updates all code paths to use rose_neigh_hold() and rose_neigh_put() which operate reference counts atomically. | ||||
| CVE-2025-39827 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: rose: include node references in rose_neigh refcount Current implementation maintains two separate reference counting mechanisms: the 'count' field in struct rose_neigh tracks references from rose_node structures, while the 'use' field (now refcount_t) tracks references from rose_sock. This patch merges these two reference counting systems using 'use' field for proper reference management. Specifically, this patch adds incrementing and decrementing of rose_neigh->use when rose_neigh->count is incremented or decremented. This patch also modifies rose_rt_free(), rose_rt_device_down() and rose_clear_route() to properly release references to rose_neigh objects before freeing a rose_node through rose_remove_node(). These changes ensure rose_neigh structures are properly freed only when all references, including those from rose_node structures, are released. As a result, this resolves a slab-use-after-free issue reported by Syzbot. | ||||
| CVE-2025-39828 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control(). syzbot reported the splat below. [0] When atmtcp_v_open() or atmtcp_v_close() is called via connect() or close(), atmtcp_send_control() is called to send an in-kernel special message. The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length. Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc. The notable thing is struct atmtcp_control is uAPI but has a space for an in-kernel pointer. struct atmtcp_control { struct atmtcp_hdr hdr; /* must be first */ ... atm_kptr_t vcc; /* both directions */ ... } __ATM_API_ALIGN; typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t; The special message is processed in atmtcp_recv_control() called from atmtcp_c_send(). atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths: 1. .ndo_start_xmit() (vcc->send() == atm_send_aal0()) 2. vcc_sendmsg() The problem is sendmsg() does not validate the message length and userspace can abuse atmtcp_recv_control() to overwrite any kptr by atmtcp_control. Let's add a new ->pre_send() hook to validate messages from sendmsg(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTI KASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f] CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline] RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297 Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4c RSP: 0018:ffffc90003f5f810 EFLAGS: 00010203 RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068c RBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0dd R10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000 R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffff FS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 ____sys_sendmsg+0x505/0x830 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8d7e96a4a9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9 RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005 RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10ac R13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250 </TASK> Modules linked in: | ||||
| CVE-2025-39834 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, Fix memory leak in hws_action_get_shared_stc_nic error flow When an invalid stc_type is provided, the function allocates memory for shared_stc but jumps to unlock_and_out without freeing it, causing a memory leak. Fix by jumping to free_shared_stc label instead to ensure proper cleanup. | ||||
| CVE-2025-39835 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: do not propagate ENODATA disk errors into xattr code ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code; namely, that the requested attribute name could not be found. However, a medium error from disk may also return ENODATA. At best, this medium error may escape to userspace as "attribute not found" when in fact it's an IO (disk) error. At worst, we may oops in xfs_attr_leaf_get() when we do: error = xfs_attr_leaf_hasname(args, &bp); if (error == -ENOATTR) { xfs_trans_brelse(args->trans, bp); return error; } because an ENODATA/ENOATTR error from disk leaves us with a null bp, and the xfs_trans_brelse will then null-deref it. As discussed on the list, we really need to modify the lower level IO functions to trap all disk errors and ensure that we don't let unique errors like this leak up into higher xfs functions - many like this should be remapped to EIO. However, this patch directly addresses a reported bug in the xattr code, and should be safe to backport to stable kernels. A larger-scope patch to handle more unique errors at lower levels can follow later. (Note, prior to 07120f1abdff we did not oops, but we did return the wrong error code to userspace.) | ||||
| CVE-2022-50339 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: avoid hci_dev_test_and_set_flag() in mgmt_init_hdev() syzbot is again reporting attempt to cancel uninitialized work at mgmt_index_removed() [1], for setting of HCI_MGMT flag from mgmt_init_hdev() from hci_mgmt_cmd() from hci_sock_sendmsg() can race with testing of HCI_MGMT flag from mgmt_index_removed() from hci_sock_bind() due to lack of serialization via hci_dev_lock(). Since mgmt_init_hdev() is called with mgmt_chan_list_lock held, we can safely split hci_dev_test_and_set_flag() into hci_dev_test_flag() and hci_dev_set_flag(). Thus, in order to close this race, set HCI_MGMT flag after INIT_DELAYED_WORK() completed. This is a local fix based on mgmt_chan_list_lock. Lack of serialization via hci_dev_lock() might be causing different race conditions somewhere else. But a global fix based on hci_dev_lock() should deserve a future patch. | ||||
| CVE-2022-50340 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: vimc: Fix wrong function called when vimc_init() fails In vimc_init(), when platform_driver_register(&vimc_pdrv) fails, platform_driver_unregister(&vimc_pdrv) is wrongly called rather than platform_device_unregister(&vimc_pdev), which causes kernel warning: Unexpected driver unregister! WARNING: CPU: 1 PID: 14517 at drivers/base/driver.c:270 driver_unregister+0x8f/0xb0 RIP: 0010:driver_unregister+0x8f/0xb0 Call Trace: <TASK> vimc_init+0x7d/0x1000 [vimc] do_one_initcall+0xd0/0x4e0 do_init_module+0x1cf/0x6b0 load_module+0x65c2/0x7820 | ||||
| CVE-2022-50342 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: floppy: Fix memory leak in do_floppy_init() A memory leak was reported when floppy_alloc_disk() failed in do_floppy_init(). unreferenced object 0xffff888115ed25a0 (size 8): comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s) hex dump (first 8 bytes): 00 ac 67 5b 81 88 ff ff ..g[.... backtrace: [<000000007f457abb>] __kmalloc_node+0x4c/0xc0 [<00000000a87bfa9e>] blk_mq_realloc_tag_set_tags.part.0+0x6f/0x180 [<000000006f02e8b1>] blk_mq_alloc_tag_set+0x573/0x1130 [<0000000066007fd7>] 0xffffffffc06b8b08 [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0 [<00000000e26d04ee>] do_init_module+0x1a4/0x680 [<000000001bb22407>] load_module+0x6249/0x7110 [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200 [<000000007bddca46>] do_syscall_64+0x35/0x80 [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 unreferenced object 0xffff88810fc30540 (size 32): comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007f457abb>] __kmalloc_node+0x4c/0xc0 [<000000006b91eab4>] blk_mq_alloc_tag_set+0x393/0x1130 [<0000000066007fd7>] 0xffffffffc06b8b08 [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0 [<00000000e26d04ee>] do_init_module+0x1a4/0x680 [<000000001bb22407>] load_module+0x6249/0x7110 [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200 [<000000007bddca46>] do_syscall_64+0x35/0x80 [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 If the floppy_alloc_disk() failed, disks of current drive will not be set, thus the lastest allocated set->tag cannot be freed in the error handling path. A simple call graph shown as below: floppy_module_init() floppy_init() do_floppy_init() for (drive = 0; drive < N_DRIVE; drive++) blk_mq_alloc_tag_set() blk_mq_alloc_tag_set_tags() blk_mq_realloc_tag_set_tags() # set->tag allocated floppy_alloc_disk() blk_mq_alloc_disk() # error occurred, disks failed to allocated ->out_put_disk: for (drive = 0; drive < N_DRIVE; drive++) if (!disks[drive][0]) # the last disks is not set and loop break break; blk_mq_free_tag_set() # the latest allocated set->tag leaked Fix this problem by free the set->tag of current drive before jump to error handling path. [efremov: added stable list, changed title] | ||||
| CVE-2022-50343 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rapidio: fix possible name leaks when rio_add_device() fails Patch series "rapidio: fix three possible memory leaks". This patchset fixes three name leaks in error handling. - patch #1 fixes two name leaks while rio_add_device() fails. - patch #2 fixes a name leak while rio_register_mport() fails. This patch (of 2): If rio_add_device() returns error, the name allocated by dev_set_name() need be freed. It should use put_device() to give up the reference in the error path, so that the name can be freed in kobject_cleanup(), and the 'rdev' can be freed in rio_release_dev(). | ||||
| CVE-2022-50344 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix null-ptr-deref in ext4_write_info I caught a null-ptr-deref bug as follows: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 1 PID: 1589 Comm: umount Not tainted 5.10.0-02219-dirty #339 RIP: 0010:ext4_write_info+0x53/0x1b0 [...] Call Trace: dquot_writeback_dquots+0x341/0x9a0 ext4_sync_fs+0x19e/0x800 __sync_filesystem+0x83/0x100 sync_filesystem+0x89/0xf0 generic_shutdown_super+0x79/0x3e0 kill_block_super+0xa1/0x110 deactivate_locked_super+0xac/0x130 deactivate_super+0xb6/0xd0 cleanup_mnt+0x289/0x400 __cleanup_mnt+0x16/0x20 task_work_run+0x11c/0x1c0 exit_to_user_mode_prepare+0x203/0x210 syscall_exit_to_user_mode+0x5b/0x3a0 do_syscall_64+0x59/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ================================================================== Above issue may happen as follows: ------------------------------------- exit_to_user_mode_prepare task_work_run __cleanup_mnt cleanup_mnt deactivate_super deactivate_locked_super kill_block_super generic_shutdown_super shrink_dcache_for_umount dentry = sb->s_root sb->s_root = NULL <--- Here set NULL sync_filesystem __sync_filesystem sb->s_op->sync_fs > ext4_sync_fs dquot_writeback_dquots sb->dq_op->write_info > ext4_write_info ext4_journal_start(d_inode(sb->s_root), EXT4_HT_QUOTA, 2) d_inode(sb->s_root) s_root->d_inode <--- Null pointer dereference To solve this problem, we use ext4_journal_start_sb directly to avoid s_root being used. | ||||
| CVE-2022-50347 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and calling mmc_free_host() in the error path, besides, led_classdev_unregister() and pm_runtime_disable() also need be called. | ||||
| CVE-2022-50349 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: tifm: fix possible memory leak in tifm_7xx1_switch_media() If device_register() returns error in tifm_7xx1_switch_media(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized. | ||||